• Skip to primary navigation
  • Skip to main content
  • Skip to footer
Meeka Metals

Meeka Metals

ASX:MEK

  • Home
  • Corporate
    • Directors & Management
    • Corporate Directory
    • Corporate Governance
  • Projects
    • Murchison Gold Project
    • Mt Holland Gold Project
    • Circle Valley Gold Project
    • Minerals Resources & Ore Reserves
  • Investors
    • Investor Dashboard
    • ASX Announcements
    • Company Reports
    • Presentations
    • Right to Receive Documents
    • News & Media
  • Work With Us
  • Contact

Projects

Mt Holland
Gold Project

Western Australia

Map of Western Australia showing the location of the Mt Holland Gold Project and Meeka's Murchison Gold Project

The Mt Holland Gold Project is located 375km east of Perth in the Southern Cross greenstone belt of the Yilgarn Craton, Western Australia, one of the world’s premier gold provinces.

Meeka’s Mt Holland tenure has a combined area of 71km² and covers ~24km of north-south striking banded iron formation (BIF) units, the principal host of gold mineralisation at Mt Holland.

Mineral Resource

The Project hosts an initial Mineral Resource of 270koz @ 2.4g/t Au, comprising the Blue Vein, Bushpig and Razorback deposits, and approximately 90km shallow historic drilling. All deposits remain open at depth and are likely to grow significantly with further drilling. The largely underexplored tenement package presents a compelling growth opportunity through new discovery within this proven gold mining district.

The area historically produced ~1.2Moz @ 5.12g/t Au prior to 2001 from the Bounty gold mine (not owned by Meeka, 5km north of Blue Vein – see below figure). However, no significant gold focused exploration has been conducted on Meeka’s Mt Holland tenure in the past ~15 years, representing a strong exploration and resource growth opportunity over the next 12-18 months.

Long sections of the Blue Vein deposit (left) and the Bounty gold mine (right) showing drill intercepts and mineralisation open at depth

Blue Vein

The drill hole database for Blue Vein contains 2,892 drillholes, for a total 86,267.22m of drilling. All reverse air blast (RAB), aircore (AC) and water bore drillholes have been considered for use in the geological and mineralisation wireframe generation dataset in Leapfrog; but have been excluded from the Mineral Resource, leaving 2,751 drill holes for 81,780.7m of reverse circulation (RC) and diamond drilling.

Razorback

Razorback has experienced far less drilling than Blue Vein and is considered drill limited and remains open at depth. All RAB, AC and water bore drillholes have been considered for use in the geological and mineralisation wireframe generation dataset in Leapfrog Geo; but have been excluded from the Mineral Resource, leaving 80 drillholes for 5,318.5m of RC and diamond drilling available for use in the estimation.

Bushpig

Bushpig has also experienced far less drilling than Blue Vein and is considered drill limited and remains open at depth. All RAB, AC and water bore drillholes have been considered for use in the geological and mineralisation wireframe generation dataset in Leapfrog Geo; but have been excluded from the Mineral Resource, leaving 90 drillholes for 6,658m of RC and diamond drilling available for use in the estimation.

Indicated Inferred Total
Project Area Type Cut-Off Grade (g/t) Tonnes (kt) Grade (g/t) Ounces (koz) Tonnes (kt) Grade (g/t) Ounces (koz) Tonnes (kt) Grade (g/t) Ounces (koz)
Mt Holland Blue Vein OP 0.5 1,030 2.0 70 120 2.4 10 1,150 2.1 80
Blue Vein UG 1.0 480 2.4 40 1,450 2.8 130 1,930 2.7 170
Blue Vein Total 1,510 2.2 110 1,570 2.8 140 3,080 2.5 250
Bushpig OP 0.5 - - - 270 1.2 10 270 1.2 10
Razorback OP 0.5 - - - 220 1.6 10 220 1.6 10
Mt Holland Total 1,510 2.3 110 2,060 2.4 160 3,570 2.4 270

The Mineral Resource was reported using both open pit (Blue Vein, Bushpig and Razorback) and underground (Blue Vein) constraints. The open pit Mineral Resource is only the portion of the Mineral Resource that is constrained within a A$2,600/oz optimised open pit shell and above a 0.5g/t Au cut-off grade. The underground Mineral Resource (Blue Vein) is only the portion of the Mineral Resource that is located outside the A$2,600/oz optimised open pit shell and is constrained within optimised underground stope wireframes (MSO optimisation wireframes) and above a 1.0g/t Au cut-off grade. The below figure is a long section showing the Blue Vein gold grade distribution, $2,600/oz open pit optimisation constraint and underground MSO Mineral Resource constraint.

Long section showing Blue Vein gold grade distribution, A$2,600/oz open pit optimisation shell and underground MSO Mineral Resource constraint

The Competent Person considers the deposit(s) could be mined using conventional open pit and underground mining techniques, with metallurgical test work showing mid-90% recovery achievable through conventional gravity and CIL processing.

Geology & Geological Interpretation

The Mt Holland Gold Field is in the southern half of the 2.9-billion-year-old Southern Cross greenstone belt. The Southern Cross greenstone belt is a 350km long, 2-40km wide Archaean supracrustal sequence bounded by granitoid and gneiss and intruded by less deformed granites. The greenstone sequence comprises a large, shallow, north-plunging syncline cored by pelitic schists. The base comprises sheared, micaceous quartz-feldspar metasedimentary rocks intruded by granitoid, overlain by cumulate-textured komatiites grading upwards into low-MgO ultramafic rocks with intercalated BIFs and doleritic units. The top of the mafic/ultramafic sequence is characterised by high-MgO basalts overlain by pelitic sedimentary rocks.

Geology map of the Mt Holland area (left) and simplified cross section of the Mt Holland greenstone sequence (right)

The contacts between the mafic/ultramafic sequence and the metasedimentary core are generally coincident with a regionally extensive fault, the Mt Holland Shear. Several gold deposits are associated with this shear zone.

Mineralisation is largely strata-bound within metamorphosed chert/BIF units. Gold is strongly associated with strike-parallel shearing within the BIF unit. Mineralisation features sulphide-rich breccias and veining within the BIF/chert. Gold is associated with pyrrhotite (dominant) ±pyrite/marcasite and occurs in quartz-sulphide veins/breccias that replace or accompany iron oxides in the host unit.

Footer

Don’t miss Meeka Metals’ latest news and releases

This field is for validation purposes and should be left unchanged.
Name(Required)

© 2026 Meeka Metals Ltd
Site by White Noise Communications

Contact

Second Floor, 46 Ventnor Ave
West Perth, WA 6005

info@meekametals.com.au

+61 8 6388 2700

Privacy

Privacy Policy

Disclaimer

Follow us

  • X
  • LinkedIn